Maintenance Technician

Position Summary

Level three mechanics work under minimal supervision to perform turret/spindle alignments, PM tasks such as trouble shoot lubrication system, hydraulics, bar feeders, etc. trouble shoot controls, issues etc., able to diagnose and repair most any NC mechanical issues; pull and replace ball screws, hydraulic and pneumatic issues. The Hybrid Maintenance Technician is a highly skilled, multi-craft professional responsible for performing advanced mechanical and electrical troubleshooting, repair, installation, and preventive maintenance on CNC/NC machines, production equipment, and facility systems. This role operates with minimal supervision and serves as a technical subject matter expert (SME) in both mechanical and electrical disciplines. Typically requires 6-10+ years of experience in an industrial/manufacturing environment. Must be of US person status to be in position.

Primary Duties & Responsibilities

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, ability and/or competency needed for successful performance in the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Diagnose and repair NC/CNC machine issues, including turret/spindle alignment and ball screw replacement
• Troubleshoot and repair:
• Perform preventive maintenance (PM) and full equipment overhauls
• Maintain furnaces, presses, cranes, forging equipment, and blast systems
• Repair refractory linings and assist with specialized furnace components
• Inspect, repair, and maintain electrical systems on all plant equipment, including:
• Troubleshoot and repair:
• Rewire and modify circuits (24V-480V, single & three-phase)
• Use testing equipment to diagnose voltage, load, grounding, and faults
• Install and commission new machinery and equipment (mechanical and electrical)
• Perform electrical work for:
• Install conduit (EMT and rigid), wiring, and mechanical components
• Read and interpret:
• Inspect equipment for wear, damage, and safety compliance
• Diagnose issues using sound, vibration, and performance data
• Test equipment post-repair to ensure proper operation
• Conduct routine inspections and maintenance to prevent failures
• Maintain logs and documentation of equipment status and repairs
• Communicate with production teams to resolve issues
• Assist in training and mentoring junior technicians
• Support continuous improvement and reliability initiatives
• Perform general facility repairs including:
• Support contractors during installations and major repairs

Required Skills:

• Strong knowledge of:
• Ability to read and interpret:

Experience using:

• Electrical test equipment (voltmeters, amp meters, etc.)
• Precision measuring tools (micrometers, calipers)
• Welding, cutting, and fabrication tools
• Alignment and diagnostic tools
• Diagnose complex mechanical and electrical issues independently
• Apply math concepts including algebra, geometry, and measurements
• Work effectively with limited standardization

Preferred Skillset

• Multi-skilled in both mechanical AND electrical maintenance
• Strong experience in:
• Able to work:
• Background in heavy manufacturing, forging, or aerospace is highly preferred

Experience & Education

• 6-10+ years of industrial maintenance experience
• Associate degree or technical training preferred
• Equivalent combination of education and hands-on experience accepted

Physical Demands

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

Work Environment

• The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• While performing the duties of this job, the employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

PCC Rollmet is an equal opportunity employer. The company's policy and practice is to provide equal employment opportunities and to assure those opportunities, without regard to age, sex (including pregnancy, childbirth, breastfeeding or related medical conditions, gender, race, color, creed, national origin, ancestry, sexual orientation including gender identity or gender expression, religion, (including religious dress and religious grooming), mental or physical disability, legally protected medical condition, genetic information, marital status, military or veteran status, reproductive decision making, or any other status protected by applicable local, state or federal anti-discrimination laws.

ITAR Requirements:

Our organization has a responsibility to comply with all applicable requirements set forth by International Traffic Arms Regulations ("ITAR", 22 CFR 120-130). As such, this position may have access to ITAR controlled information and must meet eligibility requirements to work in the United States.

Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other status protected by applicable law.

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.